. MANUAL MASSAGE
(O) Press "kneading rolling" button.
e The massage heads start the kneading rolling massage.
@ To raise the massage heads, press "up'(4) button. To lower them, press "down"(w) button.
e When you wish to stretch only a certain part of your back, use the "up"(4) button to raise the massage
heads or "down"(w) button to lower them.
@ Press "tapping rolling" button.
e The massage heads move to the weakest position and the narrowest position and start the tapping
rolling massage.
@ Use "narrow" or "wide" adjustment button to adjust the width of the massage heads.
@ To raise the massage heads, press "up"(4) button. To lower them, press "down"(w) button.
e When you wish to stretch only a certain part of the massage heads, use the"up"() button to raise the
massage heads or "down"(w) button to lower them.
Adjustability for Manual Massage
Intensity
Width
stroke
Adjustment
Adjustment
Adjustment
(ds mm)
.
13/48"
3 5/16"
or 4 5/16"
(as mm)
|O (85 or 110 mm)
10116"
O
35/16" or 4 5/16"
23 1/16"
or 4 3/4"
(15 mm)
(85 or 110 mm) | © (600 or 120 mm)
10/16"
sé
O
231116" or 4 3/4"
(15 mm)
(600 or 120 mm)
:
y
23 1/16"
10/16"
3 5/16" or 4 5/16"
23 1/16" or 4 3/4"
tapping rolling
O
(600mm
|O
(15mm)
|© (850r110mm) | © (600 or 120 mm)
NOTE: Adjustment function indications
During manual massage, the characters for
the adjustment functions which can be used
when using the currently selected massage
will be lit.
(The adjustment functions which can be used
vary depending on the selected massage.)
Massage intensity adjustment
e Adjust the massage intensity in the upward massage, downward massage and tapping massage position.
e Hold your finger on the button to choose the massage intensity desired.
e When you adjust the massage intensity, the massage heads position may change.
Adjust the massage heads position again.
,
e The massage heads stop automatically when they reach the maximum/minimum last intensity positions.
Retease your finger from the button and operation will resume.
14