Publicidad
Idiomas disponibles
Idiomas disponibles
TO START/STOP MASSAGE ACTION
Before using, first read all the instructions including the warnings and safety precautions as well as the
section on programmed and manual massage.
<BEGINNING OPERATION>
1. To operate the massager, press "start/reset" button.
e Check to be sure the operation indicator lamp is lit.
2. If you wish to stop the massage temporarily, press "stop" button.
The massage heads will stop where they are.
e Check to be sure the operation indicator goes out. To resume massage press "start/reset" button.
3. After final use, press "start/reset" button.
j
e The massage heads will go up, spread out and stop in the restore position. With the heads in this
position you can sit comfortably, using the massager as a regular chair.
e Be sure to store the controller in the pocket on the side of the left arm rest when not in use.
Operation indicator
lamp
4. Do you want programmed or manual operation?
e |f you wish to select a programmed massage, press buttons with cover closed.
e If you wish to select the manual massage, open cover and press buttons.
With cover open
With cover closed
Automatic timer for massage lounger
e To prevent excessive massaging there is a built-in timer which, after approx. 15 minutes of operation, will
automatically return the massage heads to the "restore" position and stop their motion.
e Turning on the operation switch while the massage heads are moving to the "restore" position will reset
the time for another 15 minutes (approximately).
e |f the programmed massage button is pushed, the unit will stop after finishing the program.
10
i
,
Publicidad
