Lenco LBT-335 Manual De Usuario página 14

10. When you are finished playing the record, raise the tonearm, return it to
rest on the arm clip, and turn the Start/Stop dial to the Stop.
11. Press the power button to turn off the power.
12. The platter will stop turning if there is no signal output from the unit in 3
minutes.
Bluetooth Operation
This unit has a Bluetooth transmitter to send the sound to a Bluetooth speaker of
headphone wirelessly.
1. Power on your Bluetooth speaker and ensure it is in pairing mode.
2. Power ON the turntable with the power button (2). The LED indicator (1) will
first light to RED and then will flash in blue during Bluetooth searching of the
external speaker or headphone.
Note: if you want to disable the Bluetooth searching function you can press
the Power button for 3 seconds, then the Led light indicator will light to RED.
3. When pairing, the Blue LED light will flash twice per second, then change
to be long Lighting Blue when paired;
Note: This unit will connect to the closest Bluetooth. If after 2 minutes
no Bluetooth speaker can be found to pair with, the Bluetooth
transmitter will become inactive and the LED color will turn to red.
4. To disconnect pairing, long press power button for 3 seconds or turn off
Bluetooth pairing on your External Bluetooth speaker or headphone..
"This product has a bluetooth transmission function, you can not receive any
bluetooth sound on it: this means that you can transmit wirelessly a
bluetooth sound signal to an external device like a bluetooth speaker,
bluetooth headphone, audio system with bluetooth reception,..."
13