Publicidad
Idiomas disponibles
Idiomas disponibles
EMPTYING LIQUID WASTE FROM THE TANK
1. To empty liquid waste from the tank, turn the vacuum off and remove the plug
from the wall outlet. Remove the drain cap and deposit the liquid waste in a
suitable drain. Use side carry handles for lifting vac when draining tank into
drains that are located above floor level. After the tank is empty, return the
drain cap to it's original position.
1. No lubrication is necessary as the motor is equipped with lifetime lubricated
bearings.
1. Before storing your vacuum cleaner the tank should be emptied and cleaned.
The power cord can be wrapped around the cord wraps provided on the tank
cover on rear of unit. FIGURE 1.
2. Accessories may be stored in the tool holder. FIGURE 2. The vacuum
should be stored indoors.
1. Located on the rear of your vacuum,
you will find a filter replacement chart.
This chart will indicate by "type" which
filters will fit your vacuum correctly.
FIGURE 1.
NOTE: Not all filters available for your
vacuum are listed on this chart. For
additional filters visit channellockproducts.
com.
10
LUBRICATION
STORAGE
1
FILTER REPLACEMENT
2
1
REPLACEMENT FILTERS
FOAM SLEEVE
CARTRIDGE FILTER
FILTER BAG
353780
353879
353888
353897
353842
Publicidad
