Polar UNIVERSAL LOADING CHARGER LOG Instrucciones De Uso Para El Usuario página 20

U.L.C. LOG chargers are equipped with a backlit front panel with RGB LED lights
that indicates state of charge by changing color (See fig A on page 2).
The meaning of the colors in the various states of charge is listed below:
BLINKING BLUE: Charger is ready to start charging on battery connection.
RED: Battery charging, charge level below 80%
Charge status: Bulk (see fig.B page 2)
YELLOW: Battery charging, charge level over 80%
Charge status: Absorption + Conditioning + Final (see fig.B page 2)
GREEN: Battery charged
State of charge: Floating (see fig.B page 2).
PURPLE: Desulphation mode.
U.L.C. LOG chargers
are equipped with a backlit LCD
display and five touch keys.
When switched on, the display turns on and provides information on temporary screens
which show the current settings of the charger and the version of the firmware installed.
Then the charger is ready to start charging.
The display shows a flashing drawing of a battery
to indicate that the charger is waiting for the battery
to be connected.
In this state the charger is not active and does not deliver tension.
The charge will start automatically after battery connection.
LED PANEL- THE MEANING OF COLORS
OPERATION - COMMANDS AND DISPLAYS
Boot Ver. 0.2
in progress
..
Firmware Ver.
Standard : 0.11
Battery Charger
U.L.C.
Starting
Battery Charger
..
Voltage : 80 V
Current : 130 A
Batt.Type : WET DEEP
End of Chg: Floating
LCD
Display
10.24.42
No
Battery
19.