Polar UNIVERSAL LOADING CHARGER LOG Instrucciones De Uso Para El Usuario página 23

At this screen, press
Press and
Once the first value is set, wait till the progress bar
disappears and it will move automatically
to the next value.
Order of settings:
day - month - year - hour - minutes.
Once the sequence is finished, the settings are automatically saved.
To set up the date and time, the charger must be switched on, disconnected from the battery.
When you see "No Battery" press
Entering the delayed start set menu "Setting Delayed Start'' it is possible to choose
whether to set the start time to charge (eg. Start charging at 19.30)
or set a delay charge start (eg.to charge in 2 hours and 30 min).
To set the start time of the charging process press
Press and
Press to confirm.
Press and
Press to confirm.
To set the time after which the charger will start charging process, press
the delay time setting menu.
Press and
each step adds 30 minutes up to 4h
Press to confirm.
This setting will remain unchanged even after the charger was turned off
to enter the date and time setup mode.
to increase or decrease the values .
DELAYED START
10.24.42
No
Battery
to set the hour.
to set the minutes.
set the time,
Time:
Date:
to enter the Delayed Start setup menu.
Setting
Delayed Start
+ : Set Time
- : Set Delay
to enter the time selection menu.
Set Starting Time
Time: 19:30
Set Starting Delay
10.16.33
24 -10-2021
10.24.46
10.24.57
to enter
10.25.31
02:30
22.