Publicidad
Idiomas disponibles
Idiomas disponibles
While charging, the display shows the
estimated battery charge percentage.
Touching the key
you can scroll through:
- Ampere hour (Ah) stored by the battery
since the start of the current charge.
-
Battery voltage
- Actual charging current (A).
- Estimated charge percentage.
- Time, da
te
and battery charger code
If you want to stop charging before its normal end, you must put the charger in STOP
state before disconnecting the battery to do not damage electrical contacts
of the connector.
To put the charger in STOP state, hold down
The display will show word STOP and you can safely disconnect the
battery from the charger.
After reaching the end of charge, the display will indicate 100%
Then the charger enters the maintainer mode,
showing Floating on the display.
"
Once the charger has entered the maintenance
mode as long as
it will prevent the battery from self-discharge.
In the floating phase, it is possible to disconnect
the charger at any time ( ee fig.
during charging,
(V)
.
"
it
is connected to the battery
S
B
.
for 3 seconds.
page 2.).
10.24.42
10.24.42
614
10.24.42
51.7 V
Time:
10.15.46
Date:
09-10-2021
Code: GOLD0200210120
of
charge.
10.24.42
100%
80%
Ah
20.
Publicidad
