Descargar Imprimir esta página

Braun EasyPrep FP 3101BK Instrucciones página 4

Publicidad

Idiomas disponibles

Idiomas disponibles

Misuse of your processor can result in injury.
Before removing the lid from the bowl or mini chopper/mill from the power unit:
switch off;
wait until the attachment/blades have completely stopped;
be careful not to unscrew the mini chopper/mill from the blade assembly.
DO NOT process hot ingredients.
SCALD RISK: Hot ingredients must be allowed to cool to room temperature
before placing in the bowl, mill or before blending.
Do not fill the bowl above the maximum marked capacity to avoid risk of injury due
to damage to the cover or bowl.
Do not use the lid to operate the processor, always use the on/off speed control.
This appliance will be damaged and may cause injury if the interlock
mechanism is subjected to excessive force.
The maximum rating is based on the mini chopper/mill attachment that draws the
greatest load. Other attachments may draw less power.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory, or mental capabilities, or lack of experience and knowledge,
unless they are closely supervised and instructed concerning use of the appliance
by a person responsible for their safety. Close supervision is necessary when any
appliance is used by or near children. Children should be supervised to ensure that
they do not play with the appliance.
This appliance shall not be used by children. Keep the appliance and its cord out of
reach of children.
Only use the appliance for its intended domestic use. Braun will not accept any
liability if the appliance is subject to improper use, or failure to comply with these
instructions.
slicing/grating disc safety
Never remove the lid until the cutting disc has completely stopped.
Handle the cutting discs with care - they are extremely sharp.
Do not overfill the bowl – do not exceed the maximum capacity level marked
on the bowl.
Do not process frozen foods.
mini chopper/mill safety
Never fit the blade unit to the power unit without the mini chopper/mill fitted.
Never unscrew the jar while the mill is fitted to your appliance.
Check mill for presence of foreign objects before using.
Do not touch the sharp blades – Keep the blade unit away from children.
Never remove the mill until the blades have completely stopped.
To ensure the long life of your mill, do not run it continuously for longer than 60
seconds. Switch off as soon as you have got the right consistency.
The appliance will not work if the mill is incorrectly fitted.
Do not process dried turmeric root in the mill as it is too hard and may damage the
blades.
Check mill for presence of foreign objects before using.
SAVE THESE INSTRUCTIONS
For Household use only
3

Publicidad

loading

Este manual también es adecuado para:

Easyprep fp 3211siEasyprep fp 3213siFp301aiFp301bi