cecotec CONGA 12090 TWICE ROLLER HOME&FILL Manual De Instrucciones página 67

Note:
It is recommended to replace the filter every 3-6 months.
Open the filter cover, empty the inside, and rinse it repeatedly. If dirt is present, wipe the
5.
dirt container with a dry cloth and refit the assembly. Fig. 14
Note:
- Do not use sharp objects to clean the surface of the tank.
- Wash it with clean water without adding detergent.
Omnidirectional wheel
1. Remove the mixed tank from the robot vacuum cleaner and turn it upside down. Use tools
such as a small screwdriver to pry the axle and remove the wheel as shown in Figure 15.
Note: do not remove the omnidirectional-wheel bracket.
2. Remove hair or dirt from the wheel and axle. Fig. 16
3. If you decide to use water to clean the wheel, make sure it's dry before refitting it.
4. Refit the wheel and securely tighten it.
Side brush
1. Remove the mixed tank from the robot vacuum cleaner and turn it upside down.
2. Pull the side brush out as shown in Figure 17 to remove it.
3. Clean the side brush and refit it in position.
Note:
It is recommended to replace the side brush every 3-6 months.
Main brush
1. Remove the mixed tank from the robot vacuum cleaner and turn it upside down.
2. Slightly press the main-brush frame's tabs to open the main-brush compartment and
remove it as shown in Figure 18.
3. Pull the mop roller upwards and clean the main-brush frame.
4. Use the self-cleaning brush to remove hair tangled on the main brush as shown in Figure
19.
5. Refit the main brush, firmly press down the brush frame, and secure the clip.
Note:
- Weekly cleaning is recommended.
- It is recommended to clean the main brush with a damp cloth. If you decide to use water to
clean it make sure it's dry before refitting it.
- Do not use corrosive cleaning liquids or disinfectants to clean the main brush.
- It is recommended to replace the main brush every 6-12 months.
CONGA 12090 TWICE ROLLER HOME&FILL
ENGLISH
67