Weight Defrost Function; Time Defrost Function - Sharp R-222STWE Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 28

WEIGHT DEFROST FUNCTION

WEIGHT DEFROST
The microwave oven is pre-programmed with a timer and power levels so that foods such
as pork, beef and chicken can be easily defrosted. The weight range for this is from 100g –
2000g in 100g steps.
Follow the example below for details on how to operate this function.
Example: To defrost a meat joint weighing 1.2Kg using WEIGHT DEFROST.
Place the meat in a fl an dish on the turntable.
1. Press the WEIGHT/TIME
DEFROST button.
x1
NOTE:
• Frozen foods are defrosted from -18°C.
• Before freezing foods, ensure food is fresh and of good quality.
• If necessary, shield small areas of meat or poultry with fl at pieces of aluminium foil. This
will prevent the areas from becoming warm during defrosting. Ensure the foil does not
touch the oven walls.
• Food weight should be rounded up to the nearest 100g, for example, 650g to 700g.
• After defrosting an audible signal will sound five times and the LED will then display
time of day, if the clock has been set. If the clock has not been set, the display will only
show "0:00" when defrosting is complete.

TIME DEFROST FUNCTION

TIME DEFROST
This function quickly defrosts food while enabling you to choose a suitable defrost period,
depending on the food type. Follow the example below for details on how to operate this
function. The time range is 0:05 – 95:00.
Example: To defrost food for 10 minutes.
1. Press the WEIGHT/TIME
DEFROST button.
x2
Notes for Time Defrost:
• The preset microwave power level can not be changed.
• Before freezing foods, ensure food is fresh and of good quality.
• If necessary, shield small areas of meat or poultry with fl at pieces of aluminium foil. This will prevent
the areas from becoming warm during defrosting. Ensure the foil does not touch the oven walls.
• After defrosting an audible signal will sound fi ve times and the LED will then display the time
of day, if the clock has been set. If the clock has not been set, the display will only show "0:00"
when defrosting is complete.
2. Enter the desired weight
by rotating the ENTRY
dial until the display
shows:
2. Enter the cooking time by
rotating the ENTRY dial
until the display shows:
10:00
GB-19
3. Press the START/+30sec./
ENTER button to start
defrosting.
(The display will count down
through defrosting time)
3. Press the START/+30sec./
ENTER button to start
defrosting.
(The display will count down
through defrosting time)

Publicidad

Tabla de contenido
loading

Tabla de contenido