Publicidad
Idiomas disponibles
Idiomas disponibles
BEFORE USE
Clean the blade unit, lid and bottle with warm water or in the dishwasher.
The lid, bottle and blade unit are dishwasher safe.
USE
BLENDING
1. Place the sport bottle on a flat surface with the opening facing up. Put the
ingredients you want to blend into the sport bottle. Do not put more than
600ml ingredients into the bottle. (fig.1)
fig.1
2. Screw the blade unit onto the bottle. Attach the assembled bottle with blade
unit downwards onto the motor unit. Twist it clockwise to lock it. (fig.2, fig.3)
3. Plug in the power cord. Press the pulse button 2 or 3 times to make sure the
bottle and blade unit is secured onto the motor unit. Hold the bottle with one
hand and use the other hand to press the button to get your desired results.
(fig.4, fig.5)
4. When finished blending, unplug the power cord. Make sure the blade unit has
stopped before removing the bottle from the main unit. (fig.6, fig.7)
fig.6, fig.7
5. Remove the blade unit from the bottle and attach the drinking lid to the bottle
or pour the contents into another appropriate container. (fig.8)
6. Clean all the used parts according to the instructions.
Note: Ingredients that are added to the bottle should never exceed 60°C.
Suggested dosing: 2/5 rated capacity for food, and 3/5 rated capacity for liquids.
The maximum operating time is 60 seconds. Do not let the appliance run
continuously longer than 60 seconds. Let the appliance cool down for 2 minutes
after use.
BLEND2GO · BL-5002GO
fig.2, fig.3
fig.8
7
fig.4, fig.5
EN
Publicidad
