Configuration - ZUMEX ESSENTIAL BASIC Manual De Usuario

Ocultar thumbs Ver también para ESSENTIAL BASIC:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

When you turn on the machine for the first time after purchase, a message will appear:
"Select language" in order to select the operating language of the machine.
The choice can be made using the arrows
machine will be ready for operation in "Self-Service" mode.
As a general rule, to operate within the menu, we can regard the "ON" button as accept
and "OFF" as cancel.
OPERATING MODES WITH ZUMEX ESSENTIAL PRO
Zumex Essential Pro can work in two operating modes:
Autostart: The machine detects the oranges in the feeder tube and starts up as the
oranges pass by.
Self-service: The machine starts up by activating the self-service faucet either by
pressing the faucet or by activating the switch lever; in order to be able to operate
with this switch lever see Fig. 9A and 9B. In this mode you can also work continuously
by turning the faucet block 90º (Fig. 13).
Selection of operating mode:
1
Press the MENU key for a few seconds to enter the programming mode.
2
Select the WORKING MODE option by positioning the cursors
pressing ON to confirm your selection.
3
Select the desired working mode, Autostart or Self-Service using the cursors
press on to confirm your selection. Press OFF several times until you exit MENU.
OPERATING MODES WITH ZUMEX VERSATILE PRO
Zumex Versatile can operate in two working modes:
Professional: You can programme the no. of oranges to be squeezed in each cycle
using the cursors
, and you can programme up to 20 oranges in each cycle or select
the 'c' option to squeeze continuously. The squeezing will start by pressing 'ON' and it
will end after ceasing to squeeze the no. of oranges programmed or if you press 'OFF'.
Self-service: The machine starts up by activating the self-service faucet either by
pressing the faucet or activating the switch lever. You can also work continuously in
this mode by turning the faucet block 90º (Fig. 13).
and pressing "ON". Once selected, the
over it and
and
Selection of the operating mode:
1
Press the MENU key for a few seconds to enter the menu.
2
Select the WORKING MODE option by positioning the cursors
to confirm your selection.
3
Select the desired working mode, Professional or Self-Service using the cursors
and pressing ON to confirm your selection. Press OFF several times until you exit MENU.

CONFIGURATION

Your Zumex juicer allows you to adjust the parameters according to your preferences. All
adjustments are made at MENU > CONFIGURATION. Press the MENU key for a few seconds
to enter the menu and select CONFIGURATION, press ON to confirm your selection.
LIGHTING: Changes the screen brightness level.
On the CONFIGURATION menu select LIGHTING and press ON to confirm your selection.
Adjust the brightness level using the cursors
ON. The changes will be memorised.
LANGUAGE: Changes the juicer menu language.
On the CONFIGURATION menu select LANGUAGE and press ON to confirm your selec-
tion. Select the language desired using the cursors
pressing ON. The changes will be memorised.
OFFSET: Depending on the type of fruit to be squeezed, the value can be adjusted for
its optimum counting.
Select OFFSET and press the ON key and you will be immediately asked for your PIN.
If you don't have one, consult your Technical Service. Then you configure the desired
number using the cursors
. Once the adjustment has been concluded, press ON to
save the changes. This operation must only be carried out under the supervision of an
authorised Technical Service.
NOTE: Remember that if you press OFF, you will cancel any changes
made before and you will return to the previous menu.
and pressing ON
. Once adjusted, confirm by pressing
. Once selected confirm by
41

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Essential proVersatile proEssential basic

Tabla de contenido