ZUMEX ESSENTIAL BASIC Manual De Usuario página 24

Total counter: This shows you all the oranges consumed throughout the life of the
juicer, this counter cannot be deleted.
On the TECHNICAL SERVICE menu select COUNTERS > TOTAL COUNTER and press ON
to confirm your selection. You can view the number of oranges on the screen. Move
up to the upper menu by pressing OFF.
Discounter: This allows you to programme a given no. of oranges and gradually
consume oranges from this total. On the TECHNICAL SERVICE menu select
COUNTERS > DISCOUNTER and press ON to confirm your selection. Enter your PIN
(Remember: Select each digit using the cursors
to digit and ON to confirm the password) and you will enter the discounter menu.
Programme each digit of the discounter using the cursors
digit press OFF to move on to the next one and repeat this action for each digit;
on the last digit press ON and the selection will be memorised automatically. Then
select whether you want the discounter to be visible or not on the main menu
(visible/concealed option). Return to the menu, pressing OFF repeatedly.
Once the discounter is at zero, the juicer will stop until a new sum of oranges
is loaded or a change is made to the counter function, entering the "MAIN
COUNTER" menu and confirming by pressing ON.
When the visible discounter has been programmed, a 'D' will appear on
the normal operating screen in front of the counter digits. If the concealed
discounter has been programmed, no figure will be displayed.
, press OFF to move from digit
and after each
SUMMARY OF ZUMEX ESSENTIAL PRO AND VERSATILE PRO OPERATING MODES
Working mode
Configuration Professional
Technical Service
Professional
Professional
Fruits
03
Working mode Lighting
Lighting
Configuration Language
Technical Service Offset
Language
Lighting
English
Language
Offset
1/23
Pin ? Offset
Lighting
Language
0000
Offset
Serial number
Working mode Serial number
Voltage
Configuration
Calibration
Technical Service
0000
Pin
Counters
Voltage
Serial number
Voltage
Calibration 231
Pin
Counters
Serial number Calibration value Calibration value
Voltage Offset value
Calibration Calibration
Pin
Counters
Offset value
Calibration value
Offset value
Calibration
Calibration value
Offset value
Calibration
30
97
30
Calibration Calibration Calibration
Calibration?
0000 85
45