BGS technic 8522 Manual De Instrucciones página 4

USE
Install the crankshaft locking tool (2) in the
engine block.
When installing the crankshaft locking tool (2),
the marking on the belt pulley must be aligned
with the marking on the engine block.
Position both sides of the camshaft locking tool
(1) on the camshaft sprockets and tighten the
wing screws of the adjustment. The marking in
the illustration shows the position of the wing
screws on 12V and 30V motors.
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories
and packaging should be sorted, taken to a recycling centre and disposed of in a manner
which is compatible with the environment. Contact your local solid waste authority for
recycling information. Dispose of this product at the end of its working life environmentally.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed