Toro TimeCutter MX3400T Manual Del Propietário página 33

Note:
Ensure that the engine is cool so that the
oil has had time to drain into the sump.
3. To keep dirt, grass clippings, etc., out of the
engine, clean the area around the oil-fill cap and
dipstick before removing it
Figure 34
(Figure 34).
g307458
31
Changing the Engine Oil
Service Interval: Every 100 hours—For Kawasaki
engines—change the engine
oil (more often in dirty or dusty
conditions).
1. Park the machine so that the drain side is slightly
lower than the opposite side to ensure that the
oil drains completely.
2. Disengage the blade-control switch (PTO) and
move the motion-control levers outward to the
P position.
ARK
3. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
4. Drain the oil from the engine
5. Slowly pour approximately 80% of the specified
oil into the filler tube and slowly add the
additional oil to bring it to the Full mark
36).
(Figure 35).
Figure 35
g027539
(Figure