Blackmagic Design Serie Manual De Instalación Y Funcionamiento página 23

9
To connect Open Broadcaster's broadcast
link to YouTube, click 'start streaming'
in the bottom right corner of the screen.
This establishes the link to YouTube from
Open Broadcaster and from here everything
will now be set using YouTube Live.
11
With Open Broadcaster now communicating
with YouTube Live, you are ready to begin your
broadcast. Now it's time to perform your final
checks and make sure everything is good.
You are now broadcasting live on YouTube with Open Broadcaster.
NOTE Due to the nature of internet streaming there can often be a delay, so it's important
to watch the stream on YouTube and confirm your program has finished before clicking
'end stream' to make sure you don't accidentally cut the end of your broadcast short.
10
Go back to YouTube Live and you will
see the webcam program output from your
Web Presenter in the background. Click 'done'.
12
If you are all set, you can now begin your
broadcast by clicking 'go live'.
Using Blackmagic Web Presenter as a Webcam 23