Publicidad
Idiomas disponibles
Idiomas disponibles
TIP You can use the talkback settings in ATEM Setup to select which audio channels
you want to send back to the remote Web Presenter.
Loading the XML File
With the settings file emailed to the location, the location crew simply loads the XML into the
Web Presenter using Blackmagic Web Presenter setup, then presses on air to start streaming
the weather report to the studio!
It's important to mention that once you have loaded the streaming XML file, you can then start
and stop streaming without ever having to load it again. This makes it easy to set up a constant
video link between the Web Presenter and the ATEM Streaming Bridge.
As long as the ATEM Streaming Bridge at the studio hasn't changed the streaming and network
settings and is still looking for that Web Presenter, it will always find it no matter where it is on
the internet. At any location, you can simply plug your Web Presenter into the internet, press
'on air', and it will immediately be streaming to the ATEM Streaming Bridge back at the studio.
You can find more details on how to use ATEM Streaming Bridge in the ATEM Mini manual
which can be downloaded at
Tally, Talkback and Camera Control
ATEM Streaming Bridge and Blackmagic Web Presenter also allow ATEM switchers to send tally,
talkback and camera control information. This means any SDI based Blackmagic Design camera
can be positioned at any location within your local network, or anywhere in the world via the
Internet and still have tally, talkback and camera control functionality.
It is very simple to set up. The illustration below shows how to connect an URSA Mini Pro 4.6K
to an ATEM Constellation 8K over a local network with tally, talkback and camera control.
www.blackmagicdesign.com/support
Tally, Talkback and Camera Control
26
Publicidad
