INSTALLATION INSTRUCTIONS
Conversion of the hob for different type of gas
Table 1
Defendi burner (according to the DEFENDI marking on the burner body)
Type of gas
2H G20/20mbar
3B/P G30/28÷30mbar
(for the Installer)
Once converted, place a sticker indicating the gas type for which the appliance is
intended.
Table 2
Burners
Flame
Full flame
Small flame
auxiliary
gas injector
diameter
[mm]
nominal
thermal power
thermal power
1,00 kW
0,72
0,52
Replace burner nozzle: unscrew the nozzle using a special
wrench no. 7 and replace with a new one suitable for the new
gas type (see table above).
Convert the appliance from
LPG to natural gas
Replace the burner nozzle for
a suitable nozzle according
to Table 1
Slightly undo the adjustment
needle and adjust the flame size
Burner
medium
gas injector
gas injector
diameter
[mm
nominal
thermal power
1,8 kW
0,92
0,67
Convert the appliance from
natural gas to LPG
Replace the burner nozzle for
a suitable nozzle according to
Table 1
Slightly tighten the adjustment
needle and check the size and
stability of the flame
32
large
WOK
gas injector
diameter
diameter
[mm]
nominal
nominal
thermal power
2,8 kW
2,8 kW
0,55 + 2x 0,75
0,37 + 2x 0,55
[mm]