Additional Information
Now that you understand the operating procedure, here are more features in your
control that you should become familiar with.
•
The Cool circuit has an automatic 3 minute time delayed start if the unit is turned
off and on quickly. This prevents overheating of the compressor and possible
circuit breaker tripping. The fan will continue to run during this time.
•
The control can display temperature in Fahrenheit or Celsius. To convert from one
to the other, press and hold the UP (
the same time, for 3 seconds.
FRESH AIR VENT CONTROL (FOR 10000 BTU/H TO 12000 BTU/H)
Fig. A (VENT CLOSED)
The Fresh Air Vent allows the air conditioner to:
1.
Recirculate inside air – Vent Closed (See Fig. A)
2. Draw fresh air into the room - Vent Open (See Fig. B)
3. Exchange air from the room and draw fresh air into the room - Vent and Exhaust
Open (See Fig. C).
AIR DIRECTIONAL LOUVERS
Levers
Air Direction
Page 14
)/DOWN (
Fig. B (VENT OPEN)
The louvers will allow you to direct the air
flow up or down Down (on some models)
and lefft or right throughout the room as
needed. Pivot horizontal louvers until the
desired up/down direction is obtained.
Move the levers from side to side until the
desired left/right direction is obtained.
) Temp/Timer buttons at
Fig. C (VENT & EXHAUST OPEN)