Xiaomi Mi Robot Vacuum-Mop Essential Guia De Inicio Rapido página 2

Tidy up Your Surroundings
Clearing the items from the floor
Before using the vacuum-mop, organize any loose cables including the
power cord of the charging dock, and items like rags, slippers, the tassels
or fringes of the carpet, area rug, and so on and so forth. Ensure objects
do not become tangled, caught, pulled or bumped by the vacuum-mop to
prevent injury or property damage.
Optimizing your furniture
To get as much space as possible for cleaning, properly arrange the
furniture such as tables and chairs.
Note: During the first use, accompanying the vacuum-mop can help the
vacuum-mop improve its cleaning performance.
Removing the obstacles
Move away low objects such as weight scale and standing fan that may
affect the cleaning of the vacuum-mop. Cover the areas that might get
the vacuum-mop stuck.
01
Before Use
Remove the protection
Remove the protective foam strips from both sides, and peel the protective
film off the IR sensor and the charging dock.
Place the charging dock, and connect to the power supply
Place the charging dock on the level ground without any objects above it. Do not place
the charging dock under the furniture like a cabinet or chair. To make the return of the
vacuum-mop to the charging dock a success, ensure there are 0.5 meters or more of
open space on either side of the charging dock and more than 1.5 meters in front. To
avoid the power cord being tangled by the vacuum-mop, wrap any excess cord around
the spool on the bo om of the charging dock so as not to cause the displacement or a
sudden power-off of the dock.
Note: Make sure the charging dock is in a well-lit environment without direct sunlight.
Clear off the reflective objects such as mirrors nearby to avoid affecting the returning
back of the vacuum-mop to the charging dock. Do not place the charging dock on the
table to prevent it from falling down.
Charging of the vaccum-mop
Place the vacuum-mop onto the charging dock, it automatically turns on and starts to
charge. The indicator is slowly blinking white while charging and turns into white once
fully charged.
Dock
Press to send vacuum-mop back to charging
dock. Press again to pause.
Press and hold for 5 seconds. A er hearing a
voice message, press and hold for 5 more
seconds to restore factory se ings.
Power/Cleanup Bu on
Press and hold for 3 seconds to turn the
vacuum-mop on or off when the vacuum-mop is
not charging.
Press to start or pause cleaning.
Simultaneously press and hold both bu ons
+
for 3 seconds to reset Wi-Fi.
Status Indicator
Blinking orange: Error/Returning to dock to
charge when running low ba ery.
Slowly blinking orange: Charging (the ba ery
level is low).
Slowly blinking white: Charging (the ba ery level
is more than 20%).
Blinking white: Returning to dock to
charge/Paused.
White: Cleaning/Fully charged.
Note: Please fully charge the vacuum-mop on its first use, which will take approximately 4
hours. Make sure the mop assembly is uninstalled during charging to ensure safety.
02