Epson TM-L90-i Manual Del Usuario página 14

1. Connect each cables to the connectors at the back of the printer. See the
illustration below for the positions of the connectors.
Drawer kick-out
connector
USB connectors
(for optional products)
❋1 Currently unavailable.
Notes:
❋2 Available when using the PHP function. See the TM Intelligent Printer
2. Connect other ends of the cables to external devices.
Arranging the Cables
When installing cables without locking connectors (USB cable and DC 5V cable)
through the cable exits on the back, fix the cables with the cable band (M 27) to
prevent the cables from coming off. (See illustration M.)
Note:
When attaching the connector cover (M 28), use multiple cable exits depending on the
number of the cables. After installing, make sure the cables are not pinched by the
connector cover.
Attaching the Paper Exit Guide
When you use the printer horizontally, peel off the backing sheet of the paper exit
guide (N 29) and attach it as shown in illustration N to prevent the paper cut by
the autocutter from falling inside the printer.
Note:
When using a roll paper that has a paper core smaller than the specified (internal diameter:
25.4 mm {1"}, external diameter: 31.4 mm {1.24"}), do not use the paper guide, or paper
jam may result.
7 TM-L90-i User's Manual
Analog RGB
connector ❋1
Ethernet
connector
PHP Setup Manual for how to set up the PHP environment.
Protective cover
Micro SD card
slot ❋2
USB connector
(for optional
products)
Micro-USB (Type AB)
connector (for setting only)