Publicidad
Idiomas disponibles
Idiomas disponibles
Generac Portable Products 2,400 PSIHigh Pressure Washer
How to Use the Adjustable
Nozzle
You now should know how to START your pressure
washer and how to STOP it. The informationin this
section will tell you how to adjust the spray pattern and
apply detergent or other cleaning chemicals.
A
AUTION!
Never adjust spray pattern when
spraying. Never put hands in front of nozzle to
adjust spray pattern.
The adjustable nozzle affixed to the nozzle extension
permits you to adjust the spray pattern and the spray
pressure, asfollows:
• Slide the nozzle forward to adjust the spray to low
pressure mode (Figure 17). Slide the nozzle backward to
achieve high pressure.
i
ilfB_-_/lU
Slide nozzle backward
for high pressure mode.
Slide nozzle forward for
low pressure mode and
detergent application.
• Point the nozzle down towards a firm surface and press
the trigger to test the pattern (Figure 18).
• Twisting the nozzle adjusts the spray pattern from a
narrow pattern to a fan pattern (Figure 19).
Twist nozzle
counterclockwisefor fan
spray pattern.
Twist nozzle clockwise
for narrow spray
pattern.
• For most effective cleaning, keep the spray nozzle
between 8 to 24 inchesaway from cleaning surface.
• If you get the spray nozzle too close, especially usinghigh
pressure mode, you may damagethe surface being
cleaned.
• Do Not get closer than 8 inches when cleaning tires.
Applying Detergent
with the
Adjustable
Nozzle
CAUTION!
You must attach all hoses before you
start the engine. Starting the engine without all the hoses
connected and without the water turned ON will damage
the pump.
IMPORTANT:
Use soaps designed specifically for
pressure washers. Household detergentscould damage
the pump.
To apply detergent, follow these steps:
• Review the use of adjustable nozzles.
• Prepare detergent solution as required by the
manufacturer.
• Hang the detergent solution on the "J" hook attached to
the accessory tray, as shown in Figure20.
i
10
Publicidad
