SCANCOOL GUR 600 W Instrucciones De Mantenimiento página 36

EN
MODO (ENS (ENERGY SAVING)/ ECO (WHERE APPLICABLE)
PJS4C4H001
ENS/ ECO - Energy saving - after 2 hours without opening the door, the equipment
automatically switches to Energy saving, turning off the light and increasing the set
point by + 3ºC. After 4 hours, the cabinet will return to the normal temperature. To
switch from ENS/ECO to normal operation, simply open the door for more than 10
seconds or press the ES button on the digital
(switch ON, light always on).
When fully loading the cabinet, it is possible for the alarm to go off after 2 hours if
it has not reached the set temperature, and "Hi" is visible in the display. Press the
"mute" button to turn the alarm off and wait 12 hours for the temperature to
stabilize. If the set temperature has not been reached within this time, please
contact our technical service.
With this command, the equipment has its own characteristics:
- A day and night mode (ENS/ ECO night mode visible on the display). Automatic
temperature adjustment for energy saving without the need to follow the common
practice of turning the equipment off;
- The products are preserved, for example, at four (4) degrees during the day and
at 7 degrees overnight, according to factory setting;
- The lights and the power saving mode are set to switch on and off according to
the time the door is kept closed. There is, however, a lighting button if you prefer
to keep the light always on;
- Optimization of automatic defrost;
- Reducing power consumption by stopping the fan when it is not needed;
- Adjustable cabinet temperature;
- The automatic detection of ice in the evaporator and detection of lack of gas.
4.1.2. DIXELL
XR60CH / XR70CH
37