Publicidad
Idiomas disponibles
Idiomas disponibles
ES
En el termostato podrán aparecer los siguientes mensajes de funcionamiento:
Para desconectar presione el botón ON/OFF (información "OFF" en el display,
equipamiento desconectado) o retire el enchufe de la toma de corriente. Espere 10
minutos antes de volver a conectar el equipamiento.
MODO (ENS (ENERGY SAVING)/ ECO (CUANDO APLICABLE)
ENS/ ECO - Energy saving - after 2 hours without opening the door, the equipment
automatically switches to Energy saving, turning off the light and increasing the
set point by + 3ºC. After 4 hours, the cabinet will return to the normal
temperature. To switch from ENS/ECO to normal operation, simply open the door
for more than 10 seconds or press the ES button on the digital
(switch
ON, light always on).
When fully loading the cabinet, it is possible for the alarm to go off after 2 hours if
it has not reached the set temperature, and "Hi" is visible in the display. Press the
"mute" button to turn the alarm off and wait 12 hours for the temperature to
stabilize. If the set temperature has not been reached within this time, please
contact our technical service.
58
Mensaje de Funcionamiento
Mensaje
Description
E0
Ambient Probe Failure
E1
Defrost Probe Failure
L0
Low Temperature Alarm
HI
High Temperature Alarm
DF
Defrosting in progress
OFF
Standby
Door
Open Door
ENS
Energy Saving Mode
PJS4C4H001
Publicidad
