Publicidad
Idiomas disponibles
Idiomas disponibles
LEVELING AND DOOR ALIGNMENT
Leveling
After installing,
plug the refrigerator's
power cord into a
3-prong
grounded
outlet and push the refrigerator
into the
final position.
Your refrigerator
has two front leveling
legs--one
on the
right and one on the left. Adjust the legs to alter the tilt
from front-to-back
or side-to-side.
If your refrigerator
seems unsteady, or you want the doors to close more
easily, adjust the refrigerator's
tilt using the instructions
below:
NOTE: Tools required:
11/16" (18mm) wrench or fiat blade
screwdriver.
lo
Turn the leveling leg counterclockwise
to raise that
side of the refrigerator
or clockwise
to lower it. It may
take several turns of the leveling leg to adjust the tilt
of the refrigerator.
o
Open both doors again and check to make sure that
they close easily. If the doors do not close easily, tilt
the refrigerator
slightly
more to the rear by turning
both leveling legs counterclockwise.
It may take
several more turns, and you should turn both leveling
legs the same amount.
NOTE: Your refrigerator
is uniquely designed
with
two fresh food doors. Either door can be opened or
closed independently
of the other. You may have to
exert slight pressure on the doors to get them to close
completely.
Door Alignment
Both the left and right refrigerator
doors have an
adjustable
nut, located
on the bottom
hinge, to raise and
lower them to align properly.
If the space between your doors is uneven, follow the
instructions
below to align the doors evenly:
Use the wrench (included
with the Use & Care Guide) to
turn the nut in the door hinge to adjust the height. Turn
the nut clockwise
to raise or counterclockwise
to lower the
door.
NOTE: Having someone push backward
against the top of
the refrigerator
takes some weight off of the leveling legs.
This makes it easier to adjust the legs.
i
/
/
/
16
Publicidad
