Publicidad
Idiomas disponibles
Idiomas disponibles
LED LIGHT REPLACEMENT
Electrical Shock Hazard
Before service is performed
on the interior LED lighting,
unplug the refrigerator
or turn off power at the circuit
breaker or fuse box.
Setting either or both controls to the OFF position does
not remove power to the light circuit.
NOTE: The refrigerator
and freezer compartment
lights
are LED interior
lighting, and service should be performed
by a qualified
technician.
POWER INTERRUPTIONS
1. If the power will be out for 24 hours or less, keep all
refrigerator
doors closed to help foods stay cold and
frozen.
2. If the power will be out for more than 24 hours, remove
all frozen food and store it in a frozen food locker.
WHEN YOU GO ON VACATION
If you choose to leave the refrigerator
on while you are
away, follow these steps to prepare your refrigerator
before you leave.
1. Use up any perishables
and freeze other items.
2. Turn off the icemaker
and empty the ice bin.
If you choose to turn the refrigerator off before you leave,
follow these steps.
1. Remove all food from the refrigerator.
2. Depending
on your model, set the thermostat
control
(refrigerator
control) to OFF. See the Setting the
Controls section.
3. Clean the refrigerator,
wipe it and dry well.
4. Tape rubber or wood blocks to the tops of both doors
to prop them open far enough for air to get in. This
stops odor and mold from building
up.
WHEN YOU MOVE
When you are moving your refrigerator
to a new home,
follow these steps to prepare
it for the move.
1. Remove all food from the refrigerator
and pack all
frozen food in dry ice.
2. Unplug the refrigerator.
3. Clean, wipe and dry thoroughly.
4. Take out all removable
parts, wrap them well and
tape them together
so they do not shift and rattle
during the move. Refer to the Using your Refrigerator
section for removal instructions.
5. Depending
on the model, raise the front of the
refrigerator
so it rolls more easily OR screw in the
leveling legs all the way so they do not scrape the
floor. See the Door Closing section.
6. Tape the doors shut and tape the power cord to the
refrigerator
cabinet.
When you get to your new home, put everything
back and
refer to the Refrigerator Installation
section for preparation
instructions.
26
Publicidad
