Publicidad
Idiomas disponibles
Idiomas disponibles
i i iil!liiiii!!iJ iiiii!!i !ili ii
lii! !liil!liiiii!!iJ iiii
!i
!!!!!!
New installation.
Wait 12 to 24 hours after icemaker
The icemaker
is not
producing
ice or not
enough ice.
The refrigerator
is not connected
to a water
supply or the supply shutoff valve is not
turned on.
Reverse osmosis water filtration
system is
connected
to your cold water supply.
Kink in the water source line.
Ice demand
has exceeded
storage capacity.
The icemaker
is not turned on.
There is something
on the ice-detecting
sensor.
The temperature
setting for the freezer is too
warm.
The doors are opened often.
The doors are not closing properly.
Ultra Ice is not selected.
Controls are not set correctly
for conditions.
Refrigerator
or
Freezer
section
is too
cold.
installation
for ice production
to begin. Wait
72 hours for full ice production.
Connect refrigerator
to the water supply and
turn water shutoff valve fully open.
Reverse osmosis filtration
systems can reduce
the water pressure below the minimum
amount and result in icemaker
issues. (Refer to
Water
Pressure section.)
A kink in the line can reduce water flow.
Straighten
the water source line.
The icemaker
will produce
approximately
100
cubes in a 24 hour period.
NOTE: An extra ice bucket is provided
in
the freezer section for additional
storage
capacity.
Locate the icemaker
ON/OFF
switch and
confirm
it is in the ON (I) position.
Foreign substances or frost on the ice-
detecting
sensor can interrupt
ice production.
Make sure the sensor area is clean at all times
for proper operation.
The recommended
temperature
for the freezer
compartment
for normal ice production
is
O°F. If the freezer temperature
is warmer,
ice
production
will be affected.
If the doors of the unit are opened often,
ambient
air will warm the refrigerator
which
will prevent the unit from maintaining
the
set temperature.
Lowering the refrigerator
temperature
can help, as well as not opening
the doors as frequently.
If the doors are not properly
closed, ice
production
will be affected.
See "Doors will
not close completely"
in the Troubleshooting
section for more information.
Ultra Ice increases ice production
by lowering
the freezer compartment
temperature.
Refer
to Setting the Controls for more information.
If the temperature
is too cold, raise the
temperature
setting one increment
at a time
(refer to the Setting the Controls section).
When changing
control settings, wait 24 hours
before making additional
adjustments.
33
Publicidad
