Publicidad
Idiomas disponibles
Idiomas disponibles
When positioning the appliance, be careful that the electrical cord isn't squeezed in
–
order to avoid its damage. Do not store heavy objects such as cooling devices,
furniture or other devices next the appliance in such a way that they could squeeze
and damage the electrical cord. This can cause a short circuit and a fire.
Make sure that the plug of the electrical cord is not squeezed by the back wall of
–
the appliance or otherwise damaged. A damaged plug can be the cause of a fire!
DO NOT REMOVE THE COVER OF THE LIGHT EMITTING DIODE (LED)
–
LUMINAIRE! If the cooling appliance is equipped with light emitting diode (LED)
luminaire and the lighting is not functioning, please contact a maintenance
technician to have it replaced. THE LUMINAIRE CAN BE REPLACED ONLY BY
A MAINTENANCE TECHNICIAN!
Do not try repair the appliance on your own. Always contact an authorized
technician. To avoid the exposure to danger, always have faulty cable be
replaced only by the manufacturer, by our customer service or by qualified
person whit a cable of same type.
The appliance should be transported in the vertical position. The
manufacturer will not be responsible for any damage of the appliance that
results from non-compliance with the instructions for transportation.
DESCRIPTION OF THE APPLIANCE, BASIC PARTS
See page 1, fig. 1
1
Switch -(ON/OFF);
2
Thermostat knob
3
Thermostat indicator
4
Electricity supply indicator
5
Interior light block (LED)
1 ― On / off switch for interior light I -(ON) O –(OFF)
2 ― Thermostat knob. The thermostat is off when there is a zero (0) in the thermostat
indicator space. Turning the thermostat knob clockwise the temperature in the
compartment lowers.
4 ― Electricity supply indicator. When the appliance is connected to the electricity
supply, the green indicator light is illuminated. WARNING! The fan switches on and
continuously operates
.
6
Fan
7
Shelf
8
Cleaner
9
Thermometer
10
Condenser
11
Compressor
19
Publicidad
