Descargar Imprimir esta página

LG DLEX3570 Serie Manual De Instrucciones página 46

Ocultar thumbs Ver también para DLEX3570 Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

46
MAINTENANCE
MAINTENANCE
Regular
Cleaning
_WARNING
To reduce the risk of fire, electric shock, or personal
injury when using this appliance, follow
basic
precautions,
including
the following:
• Unplug the dryer before cleaning
to avoid the risk
of electric shock. Failure to follow this warning can
cause serious injury, fire, electrical
shock, or death.
• Never use harsh chemicals,
abrasive
cleaners, or
solvents to clean the washer. They will damage the
finish.
Cleaning the Exterior
Proper care of your dryer can extend its life.
The outside of the machine
can be cleaned with warm
water and a mild, nonabrasive
household
detergent.
Immediately
wipe offany
spills with a soft, damp cloth.
,- _
NOTE
---.,
Do not use methylated
spirits, solvents, or similar
products.
Never use steel wool or abrasive cleansers; they can
damage the surface
Cleaning the Interior
Wipe around the door opening
and seal with a soft,
damp cloth to prevent lint and dust buildup that could
damage the door seal.
Clean the window
with a soft cloth dampened
with
warm water and a mild, nonabrasive
household
detergent;
then wipe dry.
The stainless steel drum can be cleaned with a
conventional
stainless steel cleaner, used according
to
the manufacturer's
specifications.
Never use steel wool or abrasive cleansers; they can
scratch or damage the surface.
Cleaning Around and Under the Dryer
Vacuum lint and dust from around
the dryer and
underneath
it regularly. Vent ductwork
should be
checked for lint buildup
and cleaned at least once per
year. If any noticeable
reduction
in airflow or drying
performance
occurs, immediately
check ductwork
for
obstructions
and blockages.
Maintaining
Ductwork
Vent ductwork
should be checked for lint buildup
and cleaned at least once per year. If any noticeable
reduction
in airflow or drying performance
occurs,
immediately
check ductwork
for obstructions
and
blockages.
Contact a qualified
technician
or service
provider.
Cleaning the Lint Filter
Always clean the lint filter after every cycle.
Lint
Filter
To clean, open the dryer door and pull the lint filter
straight
up. Then:
1. Roll any lint off the filter with your fingers, or
2. Vacuum the lint filter, or
3. If the lint filter has become very dirty or clogged with
fabric softener, wash the lint filter in warm, soapy
water and allow to dry thoroughly
before reinstalling.
,_-_NOTE
-,
NEVER operate the dryer without
the lint filter in

Publicidad

loading