Boneco W400 Instrucciones De Uso página 31

MANUAL OPERATION
ABOUT MANUAL OPERATION
Manual operation works conveniently by the knob
on the front side. The BONECO app offers additional,
extensive options for control and automation of the
BONECO W400.
AUTO MODE
If you have never operated the BONECO W400 with
the BONECO app and switch it on for the first time, it
starts up in AUTO mode. The appliance is preset to
a target humidity of 50 percent. The performance
level is automatically adapted to the current humi-
dity: The drier the air, the higher the performance
level.
If the preset target humidity is exceeded, the appli-
ance switches to standby mode, which is indicated
by the pulsing LED.
If the humidity drops below the set level, the BONE-
CO W400 resumes operation.
ADAPTED AUTO MODE
If you have already operated the BONECO W400
with the BONECO app and set a different humidity,
that value is automatically taken over when it is
switched on.
SWITCHING ON AND OFF
1. Briefly press the knob once to switch on the
BONECO W400.
The appliance is always in AUTO mode when it is
switched on. You can identify active AUTO mode by
the small LED that lights up above the knob.
2. To switch off the BONECO W400 while it is in AUTO
mode, briefly press the knob once.
31
en