Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
7.3.2
Information
The information shown on the display is described below using illustrative examples.
Status display
The status display shows measurements as listed below:
3
Menu
2
Numeric yield (day, month, year)
Daily, monthly and annual yields can be displayed numerically in a List.
Numeric yield (total yield)
The total yield is displayed in its own window.
744.711 | 12.20
1
2 2
F
4
5
6
7
8
_
1
1
2
1
2 2
3
Measurement name
Measurement with units
Date
Symbol non-confirmed event messages; more information
on this is provided in Section 10, P. 29.
Animated Connect symbol with 2-digit inverter address;
indicates data traffic on the RS485 bus.
Symbol Derating
Symbol Fixed voltage mode activated
Time
The following applies to the status display:
• The measurements shown in the status display are de-
fined under Settings/Measurements. Some measure-
ments are always displayed (default setting).
• Current values are not displayed at night (solar irradiation
too low; example in fig. left).
• The CO
savings shown in the status display are calcu-
2
lated using the savings factor 508 g/kWh.
Designation of the main/submenu
Menu entries
Yield period (day/month/year)
Individual yields with period and value (1 per row)
The yield periods contain the following numbers of individual
entries:
Day yield: last 31 days
1)
Monthly yield: last 12 months
Annual yield: last 30 years
A yield value of 0 is shown when the inverter has not yet
1)
been installed at this time.
Yield period for Total yield (all yields since initial commis-
sioning)
Starting point of recording
Total yield with units
1)
1)
EN
9
Publicidad
Capítulos
Tabla de contenido
