GE 18 Manual Del Propietario E Instalación página 10

Aboutcrisperremoval
Not all features are on all models.
Removing the glass cover
Removing the frame
Crisper Removal
i
Unloadthe bottom shelf before attemptingto
remove the storage drawers.
ToRemove:
Lift the drawers up slightly while pulling
them past the Nap location.
Whenthedoorcannotbefullyopened:
Pull the drawer farthest from tile door
straight out. Slide the other drawer toward
tile middle and remove it.
Toremovetheglasscover.
Remove the glass, then the frame. When
replacing the glass, push the rear edge
firmly into the frame.
0 Push up tile glass cover at the fi'ont.
Slide the gla_s cover fbrward until the
hack edge comes out of tile frame.
O Rotate the side of the glass cover up.
Remove the glass coven
Toremovethe frame:
Lift up the front of the frame using
both hands.
Slide the frame fbrward.
Rotate the side of the frame up.
Remove the frame.
About the additional features.
Not all features are on all models.
ShelfSaver
TM
Rack
This slide-out rack holds twelve cans of soda
or two wine/water hordes (lengthwise).
Can be removed fbr cleaning.
TOremove, slide the rack out to the stop
position, lift the rack up and past the stop,
and lift out.
10