Display Indications; Battery Installation/Removal - Alan HP 446 Manual Del Usuario

Display indications

B
C
H
A. Channel number
B. SAT CTCSS/DCS Tone indicator
C. Battery level indicator (blinking when the battery is low)
D. P Priority channel indicator
E. VOX Light to indicate Vox is on
F. • Light to indicate the CH is on Scan list
G. Light to indicate key lock
H. LOW Light to indicate RF Power is low
4
Setup
A
E
G
D
F
SETUP
Accessories supplied as standard in the box:
a. Transceiver main body (with stubby antenna).
b. High capacity 1300mA/h NiMH battery pack.
c. Slow desk top battery charger
d. Belt clip
e. User guide (this booklet)

BATTERY INSTALLATION/REMOVAL

1
1. Place the battery pack
2. Push the battery pack towards the back
2
To remove the battery pack:
1
1. Press the battery release button [11] and
2. Pull the battery pack away from the
2
into the bottom of the radio.
edge of the transceiver until you hear a
click indicating that the battery pack
has snapped into place and is now fully
locked.
hold .
transceiver back edge.