UFESA DH5010 Manual De Instrucciones página 34

appliance.
Fan Speed: Press the fan button to set the desired fan speed between hi h and low
Display screen: In Auto dehumidifyin or dryin clothes mode, it will indicate the actual room humidity.
In timin mode, it indicates the settin time.
Set the humidity level: In Auto dehumidifyin mode, press the button repeatedly to set humidity from
80% to 30% in 5% increments.
Mode: When power on or timin power on, press this button to choose auto dehumidifyin or dry cloth
function. The li hts will flash when choose the modes.
On/O : Press the key to turn on/turn o the dehumidifier.
HOW TO OPERATE
Settin the timer o
When the dehumidifier is runnin , press "TIMER" (9) to start the function, then press "TIMER" button to
set hours, timin ran e is from 1 to 24 hours, it will increase 1 hour by each press. When time is up to your
settin , the unit will turn o .
After settin , the timer button will flash 5 times for confirmation.
Settin the timer on
When the dehumidifier is in standby state, press "TIMER" to start the function, then press "TIMER" button
to set hours, when time is up to your settin , unit will turn on.
After settin , the timer button will flash 5 times for confirmation.
AUTO DEHUMIDIFYING MODE
Under this mode, if the room humidity > settin humidity + 5%, the compressor will start, and the fan will
works;
If the room humidity < settin humidity - 5%, the compressor will stop and the fan will work accordin
to the ori inal settin ;
If the settin humidity - 5% < room humidity < settin humidity + 5%, the unit will continue workin ac-
cordin to the ori inal settin s. The initial humidity value is 50%.
DRY CLOTHES FUNCTION
Select that mode to help you dryin your clothes faster.
Under this mode, the unit will work re ardless of the room humidity.
The fan will work from hi h speed and its speed is adjustable.
ANTI-FROST FUNCTION
This function will be activated when the ambient temperature falls below 16°C.
34