Descargar Imprimir esta página

UFESA DH5010 Manual De Instrucciones página 35

Ocultar thumbs Ver también para DH5010:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
The display will show „P1".
It will be activated for a period of 8 minutes every 38 minutes between 2-12°C.
It will also be activated for a period of 5 minutes every 60 minutes between 12-16°C.
MANUAL DRAINING
When water tank is full, the water-full indicator is on.
The unit will stop workin and buzzer will sound 10 times till water is pour o .
Take out water tank, pour away water.
Replace the water tank, dehumidifier restarts workin .
Please install the water tank as the Fi 2.
Note: Do not remove the float from the water tank.
The water full sensor will no lon er be able to detect the water level correctly without the float and water
may leak from the water tank.
CONTINUOUS DRAINAGE
Connect a plastic hose (with an inner diameter of 9 mm) to the continuous draina e port via the small
hole.
Water can be drained continuously.
Please check if the pipe is stably connected with the draina e mouth, or water will flow out. Fi .3
Note: Water pipe cannot be too lon (usually 0.6m), the hei ht cannot surpass the hei ht of draina e
mouth, or there will be water leaka e.
AFTER HAVE FINISHED USING THE APPLIANCE
Stop the appliance by releasin the pressure on the on/o button.
Unplu the appliance from the mains.
Remove the water from the water tank.
For storin , stand the unit upri ht and avoid exposure to the direct sunli ht.
CLEANING
Turn o the unit and disconnect the power plu before startin any cleanin task.
Cleanin the body:
Wipe the dehumidifier with a dry and soft cloth.
To remove heavy dirt, wipe it with a cloth wrun ti htly.
Never use a wet cloth for cleanin the control panel.
DO NOT IMMERSE IN WATER OR ANY OTHER LIQUID.
35

Publicidad

loading