Tripp-Lite B032-VUA4 Manual De Usuario página 4

Installation
Note: Make sure the power to all devices is turned off prior to installation. You must unplug the power cords of any computers that have
the Keyboard Power On Function.
1
Plug your USB keyboard, mouse and VGA monitor into the console ports on the unit.
Note: If using a wireless keyboard and mouse, the dongle must be plugged into the unit's keyboard port to use the hotkey function.
2
(Optional) A USB hub can be connected to the USB console mouse port, allowing you to add multiple USB
peripherals to your installation.
Note: To ensure proper functionality, use a hub with an external power supply. The KVM's Mouse Emulation Mode must also be
disabled (see the Keyboard Hotkey Commands table in this manual for details) when connecting a hub.
3
Plug your speakers into the 3.5 mm speaker jack.
4
Plug the unit's built-in USB, VGA and audio cables into the computers' corresponding ports.
5
Power on your devices.
Note: The unit's default power on function will link to the first computer being powered on.
3
2
1
3
4