Tripp-Lite B032-VUA4 Manual De Usuario página 7

Operation
Firmware Upgrade Utility
To upgrade the B032-VUA4 firmware:
1. From a computer that is not part of your KVM installation, download the latest Firmware Upgrade package for the
B032-VUA4 from tripplite.com.
2. Invoke Firmware Upgrade Mode [Num Lock] [-] [Upgrade]. The LEDs will flash together to indicate Firmware
Upgrade Mode is in effect.
Note: While the switch is in Firmware Upgrade Mode, normal keyboard and mouse functions are suspended. You must complete
the upgrade or exit Firmware Upgrade Mode to regain normal control of the console.
3. Run the Firmware Upgrade Package file. The Firmware Upgrade Utility Welcome screen will appear.
4. Read the License Agreement and enable I Agree button.
5. Click Next to continue. The Firmware Upgrade Utility main screen will appear. All the devices capable of being
upgraded by the package are listed in the Devices List panel.
6. Select your device. Its description appears in the Device Description panel. Click Next to perform the upgrade. As the
upgrade proceeds, status messages appear in the Status Messages panel and the progress towards completion is
shown in the Progress bar.
7. After the upgrade has completed, a screen will appear to inform you the procedure was successful. Click Finish to
close the Firmware Upgrade Utility.
8. Set up your KVM installation again. See the Installation section for details.
Upgrade Failed
If the Upgrade Succeeded screen does not appear, it means the upgrade failed to complete successfully, in which case
you should return the unit to your local service center for assistance.
7