Publicidad
Idiomas disponibles
Idiomas disponibles
Installation Instructions
[_
USE TOP CABINET TEMPLATE
FOR PREPARATION
OF TOP
CABINET
You need to drill holes for the top support screws, and
a hole large enough
for the power cord to fit through.
• Read the instructions
on the TOP CABINET
TEMPLATE.
" Tape it underneath
the top cabinet.
• Drill the holes, following the instructions
on the
TOP CABINET TEMPLATE.
CAUTION:
Wear safety goggles when drilling holes
in the cabinet bottom.
I-_
MOUNT
THE OVEN
FOR EASIER INSTALLATION
AND PERSONAL
SAFETY, WE RECOMMEND
THAT TWO PEOPLE
INSTALL TillS OVEN.
IMPORTANT:
Do not grip or use handle
during installation.
NOTE: If your cabinet is metal, use the nylon
grommet around
the power cord hole to prevent
cutting of the cord.
NOTE: We recommend
using filler blocks if the
cabinet front hangs below the cabinet bottom shelf.
IMPORTANT:
If f'dler blocks
are not
used,
case
damage
may
occur
from
over
tightening
screws.
NOTE: When moundng
the oven, thread power cord
through
hole in bottom of
top cabinet. Keep it tight
throughout
Steps 1-3. Do
not pinch cord or lift oven [_Lift
oven, tilt it
by
forward and hook
slots at back bottom
edge onto two lower
tabs of mounting
[_]Rotate
front of oven up
against cabinet bottom.
[3]Insert
a self-aligning
screw through
top center
cabinet
hole.
Temporarily
secure
the oven by turning
the screw at least two full turns after the threads
have engaged.
(It will be completely
tightened
later.)
Be sure to keep power
cord fight. Be careful
not to
pinch the cord, especialIy
when mounting
flush to
bottom
of cabinet.
13
Publicidad
