Kenmore 363.63672 Instrucciones De Instalación página 22

Installation Instructions
MOUNT THE OVEN
(continued)
[_] Insert a seK-'aligning screw tbrougta top center cabinet
hole. Temporarily secure the oven by turning the
screw at least two full turns after the threads have
engaged. (It will be completely tightened later.) Be
sure to keep power cord fight. Be careful not to pinch
the cord, espedally when mounting flush to bottom
of cabinet.
CabinetFront
r__.._Cebinet Bottom Shelf
I',I,M_ FillerBlock
___._of C abinetRecess
Oven Top
[4]Attach the oven to the top cabinet.
[] insert 2 self-aligning screws through
outer top cabinet holes. Turn two full
turns on each screw.
_] Tighten center
screw completely.
[_]Tighten the outer two screws to the top of the
oven. (While tightening screws, hold the oven
in place against the wall and the top cabinet.)
[_]Install grease filters. See the Use & Care Guide
packed with the oven.
ADJUST THE EXHAUST
ADAPTER
Open tile top cabinet and adjust tile exhaust adapter
to connect to the house duct.
Damper
Back ofOven
/
CONNECTING DUCTWORK
HouseDuct
[_] Extend the house duct down to connect to the
exhaust adapter.
[] Seal exhaust duct joints using duct tape.
22