Dolmar PLM4626 Manual De Instrucciones página 11

4. TECHNICAL DATA
Model
Engine type
Self-propelled
Engine displacement
Blade width
Rated speed
Fuel tank capacity
Oil capacity
Grass catcher capacity
Net weight
Height adjustment
Differences between three models
Front handle of
Model
PLM4626
PLM4627
PLM4628
Model
Guaranteed sound power level at the
operator's position
(According to EN 836 Annex
H&EN ISO 4871)
Measured sound power level
Guaranteed sound power level
(According to 2000/14/EC)
Vibration
(According to EN 836 Annex G)
5. ASSEMBLY
5-1 FOLDING HANDLE
1. Use the locking knob to fix the lower handlebars into
the unit body. (Fig. 1A/Fig. 1B/Fig. 1C/Fig. 1D)
2. Lift the two locking levers to release the upper
handlebars for folding. (Fig. 1E)
3. Push the locking lever closed to lock the handlebars in
the operating position. (Fig. 1F)
4. Adjust the tension by turning the lock nut with a
suitable spanner. (Fig. 1G/Fig. 1H)
5. Attach the cable-clamp to the position shown and then
attach the cable. (Fig. 1I/Fig. 1J)
5-2 ADJUSTMENT FOR AN
APPROPRIATE ANGLE
A) Pull the locking lever opening;
B) Rotating the upper handle centered of the angle
adjusting gear for adjusted an appropriate angle into
the scope –20° to 20° (5 position: –20°/–10°/0°/10°/
20°) as the Fig. 2 shown;
C) Push the locking lever closed to connect the lower
handle and the upper handle.
PLM4626
B&S500E, 09P6
140 cm
460 mm
2,800/min
800 ml
470 ml
28.0 kg
30-75 mm, 7 adjustment
Side discharge
deck

86.9 dB (A) (K=3 dB (A)) 86.9 dB (A) (K=3 dB (A)) 86.9 dB (A) (K=3 dB (A))
93.7 dB (A)
K=2.38 dB (A)
4.531 m/s
K=1.5 m/s
B&S500E, 09P6
no
3
60 L
30-75 mm, 7 adjustment
Self-propelled


PLM4626
96 dB (A)
2
2
5-3 MOUNTING THE GRASS CATCHER
1. To fit: Raise the rear cover and hitch the grass catcher
on rear of mower. (Fig. 3A/Fig. 3B/Fig. 3C)
2. To remove: Grasp and lift rear cover, remove grass
catcher.
5-4 STARTER HANDLE
Move the starter handle from the engine to the rope guide.
(Fig. 4)
5-5 HEIGHT OF CUT
Apply outward pressure to disengage lever from rack.
Move lever forward or back to adjust height. (Fig. 5 and
see clause 7.9)
6. "3 IN 1" (only for PLM4627,
PLM4628)
These lawn mowers can be retrofitted from its normal
function, based on the application purpose:
From lawn mower with rear discharge to:
1. Mulching mower or as
2. Side-discharge mower.
PLM4627
no
3
140 cm
460 mm
2,800/min
800 ml
470 ml
60 L
28.4 kg
30-75 mm, 7 adjustment
PLM4627
93.7 dB (A)
K=2.38 dB (A)
96 dB (A)
2
4.531 m/s
2
K=1.5 m/s
PLM4628
B&S500E, 09P6
yes
3
140 cm
460 mm
2,800/min
800 ml
470 ml
60 L
31.2 kg
PLM4628
93.7 dB (A)
K=2.38 dB (A)
96 dB (A)
2
4.531 m/s
2
K=1.5 m/s
11