Section SEVEN: BEFORE CALLING FOR SERVICE
Before Calling for Service
Before calling for service, checkthe following to avoid unnecessary
service charges.
Be sure to check
these
items first:
Is there a power outage in the area?
Is the household
fuse blown or the circuit
breaker tripped?
Is the range disconnected
from the electrical
supply?
IF THE
BURNERS
DO NOT
IGNITE
•
Arethe
burner caps properly aligned and seated in the burner bases?
•
Are the burner ports clogged?
•
Is a fuse blown or is the circuit breaker
tripped?
•
Is the manual
shut-off valve closed,
preventing
the flow of gas?
DATA RATING PLATE
The data rating plate shows the model and serial number of your range.
It is located
behind the toe kick at the bottom of the range.
To access
the rating
plate,
remove
the two toe kick attachment
screws,
then
carefully
remove the toe kick panel.
The electric wiring diagrams
and schematics
in the toe kick area should
not be removed, except by a service technician, then replaced afterservice.
SERVICE
INFORMATION
For handy reference,
copy the
information
below from the data
rating plate.
Keep your invoice
for Warranty
validation.
Model Number
Serial Number
Date of Purchase
Dealer's
Name
Dealer's
Phone Number
Service
Center's
Name
Service
Center's
Phone Number
Also,
enter
this
information
on
the Product
Registration
Form in-
cluded with this product, then mail
it to the indicated
address.
Caution:
Before removing
the toe kick panel, disconnect
the range from the
electrical
power
supply.
Reinstall
the toe
kick
panel
before
reconnecting
the range
to the power
supply
and operating
the
range.
Lower
front
of
range behind toe
PD Data
Rating Plate Location
44