Cleaning The Filter; Installing The Filter; Battery Pack - Dreame VPD1 Manual De Usuario

Care & Maintenance
EN

Cleaning the Filter

It is recommended to clean the filter once every 4 to 6 months.
1. Remove the dust cup as shown in the
figure.
3. Clean the filter with clean water. Make
sure you rotate the filter 360° to thoroughly
and remove all dust caught in the filter.
Lightly tap the filter several times to remove
any excess dirt.
Note:
• Only use clean water to wash the filter. Do not use detergent.
• Do not attempt to clean the filter with a brush or finger.
14
2. Remove the filter from the vacuum by
pulling it down in the direction shown in the
figure.
4. Allow the filter to air dry for 24 hours.
12
11 1
10 2
24 hrs
9 3
8 4
7 5
6
Care & Maintenance

Installing the Filter

1. Insert the filter into the vacuum and
gently press down, as illustrated.

Battery Pack

The vacuum contains a removable rechargeable lithium-ion battery pack which has a
limited number of recharge cycles. After extended use, the battery pack may no longer
hold a charge. If this happens, it means the battery pack has reached the end of its life
cycle and needs to be replaced.
1. Press down the battery pack release button and slide the battery pack to the right, as
illustrated, to remove it.
2. Install the new battery pack.
2. Reinstall the dust bin.
2
Click
EN
15