Descargar Imprimir esta página

Dreame VPD1 Manual De Usuario página 8

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 42
How to Use
EN
Using Different Accessories
Soft Roller Brush Bar: Suitable for vacuuming wood, tile, marble, and other hard floor
surfaces as well as for vacuuming up larger pieces of dirt and debris.
2-in-1 Crevice Nozzle: Suitable for
vacuuming cracks, corners of doors and
windows, stairs, and other hard-to-reach
places.
Note:
• If any rotating part becomes stuck, the vacuum may shut off automatically. Remove any trapped
foreign objects, then resume use.
• When the battery becomes overheated, the vacuum will automatically shut off. Wait until the
battery temperature returns to normal, then resume use.
10
Attachment Clip: The 2-in-1 crevice nozzle
can be stored in the attachment clip as
shown when not in use.
Care & Maintenance
Tips:
1. Always use genuine parts to keep your warranty from being void.
2. If the vacuum is not used for an extended period, fully charge it, unplug its charger, and
store it in a cool, low-humidity environment away from direct sunlight. To avoid over-
discharging the battery, recharge the vacuum at least once every three months.
Cleaning the Vacuum
Wipe the vacuum with a soft dry cloth.
Cleaning the Dust Bin & Pre-Filter
Before cleaning the dust bin, disconnect
the adapter and keep the vacuum's power
switch in the off position.
1. Press the dust bin release button and
hold the dust bin to remove form the
vacuum in the direction of the arrow .
2. Empty the bin.
Note: It is recommended to clean the dust
bin after use.
Method 1: Press the release button on the
bottom of the bin.
Method 2: Hold the upper cover of dust bin,
then remove the cyclone assembly.
EN
11

Publicidad

loading