cecotec READYWARM 2000 POWER CEILING Manual De Instrucciones página 49

4. CLEANING AND MAINTENANCE
Maintenance
Warning: regular and thorough maintenance of the infrared heater is necessary for long and
efficient operation.
At least once a month, check that the reflector and the infrared (IR) sensor are clean. If
-
necessary, clean the reflector or sensor according to the cleaning and maintenance section.
Periodic inspections should be carried out more frequently in dusty environments.
-
Check if the reflector, cable, or frame are deformed while cleaning the device. In case of
-
deformation, consult a qualified technician.
Check the power cord and plug while cleaning the appliance. In case of deformation,
-
consult a qualified technician.
It is recommended to replace the reflector every two years to ensure efficient operation.
-
Cleaning
Warning: regular and thorough cleaning helps your heater to function efficiently for many
years.
Unplug the power cord before cleaning the appliance.
-
Take out the front grid wire through the inlets on the frame using a slotted screwdriver.
-
The reflector and the infrared should be cleaned with a soft cloth, a soft brush or with cold
-
or dry air. The cloth may be damp, but never too damp, and the cleaning product must not
contain any chemicals.
Do not use cleaning agents that could damage the reflector (brush, etc.).
-
- Reinsert the wire mesh using a slotted screwdriver.
6. TECHNICAL SPECIFICATIONS
Product reference: 08263
Product: Ready Warm 2000 Power Ceiling
Voltage: 220-240 V
Frequency: 50/60 Hz
Energy supply: 2000 W
Technical specifications may change without prior notification to improve product quality.
Made in China | Designed in Spain
READYWARM 2000 POWER CEILING
ENGLISH
49