Publicidad
Idiomas disponibles
Idiomas disponibles
User Manual
Switching command, only available on SINGLE mode
Commands
SET AUTO SWITCH w
GET AUTO SWITCH
SET IN SOURCE w
GET IN SOURCE
GET IN RESOLUTION
GET IN STATUS
Output command
Commands
SET OUT RESOLUTION w
GET OUT RESOLUTION
SET RESO-USER Width Height
GET RESO-USER
SET OUT 4K-AUTO w
GET OUT 4K-AUTO
SET OUT HDCP w
GET OUT HDCP
SET OUT VKA w
GET OUT VKA
SET OUT ITC w
Details
w is ON or OFF, default OFF
Return: AUTO SWITCH w
Return: AUTO SWITCH w
w is one of the following:
HDMI1, HDMI2, HDMI3, HDMI4, USB-C
Return: IN SOURCE w
Get current input channel selection information
Return: IN SOURCE w
Get current input resolution
Return: IN RESOLUTION w (w is input resolution)
Get status of all input ports
x is HDMI1...HMDI4, USB-C
Return: IN STATUS x VALID (or INVALID)
If input port is vaild,
Return: IN STATUS x InputRes ColorSpace ColorDepth
Details
w is one of the following, default: 3840x2160p60
4096x2160p60, 4096x2160p50,
3840x2160p60, 3840x2160p50,
3840x2160p30, 3840x2160p25,
1920x1200p60RB, 1920x1080p60,
1920x1080p50, 1360x768p60,
1280x800p60, 1280x720p60,
1280x720p50, 1024x768p60，
AUTO, USER
Return: OUT RESOLUTION w
Get current output resolution setting
Return: OUT RESOLUTION w
Set user define output resolution
Width is horizontal active pixels
Height is vertical active lines
For user define output resolution, the frame rate is always 60Hz
Return: RESO-USER Width Height
Return: RESO-USER Width Height
w is ON or OFF, default ON
If we set 4K output to a displayer which can't support 4K, then the
ON setting can change the resolution to 1080p or 4K-4:2:0
Return: OUT 4K-AUTO w
Get current OUT 4K-AUTO mode
Return: OUT 4K-AUTO w
w is one of the following, default OFF
FORCE-1.4, FORCE-2.2, FORCE-OFF
Return: OUT HDCP w
Return: OUT HDCP w
w is BLUESCREEN or BLACKSCREEN.
Default BLACKSCREEN. It is for no signal display
Return: OUT VKA w
Return: OUT VKA w
w is ON or OFF, default OFF
Return: OUT ITC w
English
Publicidad
