RS Pro RS-33S Manual De Instrucciones página 16

Battery Capacity Tester / EN
4. Clamp the current adaptor jaws around one of the conductors under test. Make
sure that the jaws are perfectly closed.
5. Read the current value from the meter.
4-6 Disable Auto Power off Function
If no switch is operated for 10 minutes, the meter automatically turns off.
Auto data memory and continuous data logging modes will disable the auto power off
function.
For continuous measurement, in some case it may be necessary to disable the auto
power off function.
1. Rotate the resistance range switch to OFF position to turn off the meter.
2. Press and hold down "HOLD" key, then rotate the resistance range switch to any range
to turn on the meter, the "
4-7 Setting the Real Time
1. Press TIME key 2 seconds, "SET TIME" appears on the display.
, , ⊳ and
2. Press
day : hour : minute :second.
3. Press TIME key again to store the settings and exit.
13
" symbol will disappear.
keys to set up the real time
09/15/17 Version No. 00