Guidance And Manufacturer's Declaration - Electromagnetic Emissions; Explanation Of Symbols - Philips ZOOM! WhiteSpeed Instrucciones De Uso

12 English
Cooling Air cooled
Height 136 cm (53.5 in)
Weight 11 kg (24 lbs)
Guidance and manufacturer's declaration – electromagnetic emissions
The accelerator light is intended for use in the electromagnetic environment specified below. The customer or the user
should assure that it is used in such an environment.
Emissions Compliance
RF emissions CISPR 11 Group 1
RF emissions CISPR 11 Class A
Power line harmonics Class A
IEC/EN 61000-3-2
Power line flicker Complies
IEC/EN 61000-3-3

Explanation of symbols

Type B applied part
Manufacturer
Date of manufacture
Caution
Serial number
Hazardous voltage
ZOOM_3000.040.0114.3_BOOKLET-lux_US-letter_FC.indd 12 ZOOM_3000.040.0114.3_BOOKLET-lux_US-letter_FC.indd 12
Electromagnetic environment – guidance
The accelerator light uses RF energy only for its internal function. Therefore, its RF emissions are
very low and are not likely to cause any interference in nearby electronic equipment.
The wireless transmitter in the foot pedal is battery powered only, and does not connect to public
mains.
The Zoom! WhiteSpeed accelerator light is suitable for use in all establishments other than domestic
and those directly connected to the public low-voltage power supply network that supplies buildings
used for domestic purposes, provided the following warning is heeded:
Warning: This equipment/system is intended for use by healthcare professionals
only. This equipment/system may cause radio interference or may disrupt the
operation of nearby equipment. It may be necessary to take mitigation measures,
such as re-orienting or relocating the Zoom! WhiteSpeed accelerator light or
shielding the location.
Consult instructions for use
Unit must be disposed at an appropriate facility
Fragile, handle with care
Keep dry
Conformity European
07-05-21 09:39 07-05-21 09:39