Philips SRP8121G/27 Manual De Instrucciones página 6

Programming Your Remote
Your remote is designed to control multiple
audio/video devices. To use, you will need to
program the remote for your devices. There are
two different methods you can use to program
the remote, Direct Code Entry or Auto Code
Search.
• The Direct Code Entry method is the
recommended approach, as it is the simplest
and quickest process in most cases.
• The Auto Code Search method searches
through all the codes in the remote to find a
code for your device.
NOTE: This remote comes preprogrammed for
Roku
MENU
Samsung TVs and strm for Roku boxes.
APPS
Direct Code Entry (Recommended)
OK
Sleep Setup
1 2
4 5
8
7
0
SRP8121G_27 EnSp manual v1.indd 6 SRP8121G_27 EnSp manual v1.indd 6
INPUT
boxes and Samsung TVs. Press tv for
®
Locate the Code List included
1.
with your remote. Find the section
for the type of device you wish
to control, (for example tv, strm,
aud, etc). Locate the brand of your
device and circle all the remote
codes for the brand.
2. Press and hold down the Setup
button on the remote until the red
light on the remote control turns
ch
on. Release the Setup button.
The red light will remain on.
3
NOTE: The red light will either be a
small light at the top of the remote or
6
the power ON/OFF button.
3. Press and release the device button
9
INPUT
on the remote for the type of device
you wish to control, (for example
ENTER
tv, strm, aud, etc). The red light will
blink once and remain on.
NOTE: Any of the device buttons
on the remote can be programmed
to control any of your devices. For
example, you can use the aux device
MENU
button on the remote to control a
satellite receiver, digital converter
APPS
box, streaming media player or any
device category in the Code List.
OK
6
5/24/21 6:21 PM 5/24/21 6:21 PM