Philips SRP8121G/27 Manual De Instrucciones página 7

MENU
APPS
Programming Your Remote
OK
Sleep
1 2
4 5
8
7
0
Programming Notes
MENU
• Some codes may operate only a few functions
of your device. There may be another code in
the Code List that controls more functions.
Test other codes in the Code List for more
functionality.
• If you do not find a remote code that works
your device or there are no codes in the
Code List for your device, use the Auto Code
Search method in the next section to program
your remote.
• For combination devices such as a TV/DVD
combo or TV/VCR combo, you may have to
enter a code for each device.
• Write down the remote codes used to
program the remote for future reference.
Auto Code Search
The Auto Code Search is a process where you can
search through all the codes stored in the remote
to find a code for your device. It is recommended
that you read through all the steps below to
familiarize yourself with the Auto Code Search
before starting the process.
SRP8121G_27 EnSp manual v1.indd 7 SRP8121G_27 EnSp manual v1.indd 7
4. Use the number buttons on the
remote to enter the first 4-digit
Setup ch
3
remote code you circled in the
Code List in Step 1. The red light
6
will turn off after entering the
9
fourth digit.
ENTER
5. Point the remote at the device.
Test the buttons on the remote to
see if the device responds as you
would expect. If the buttons do not
INPUT
operate the device, return to Step
2 above and use the next code that
you circled for that device.
6. Repeat steps 1 – 5 for each
device you wish to control.
APPS
OK
Sleep Setup ch
1 2
3
4
5 6
8
7 9
0
ENTER
7
5/24/21 6:21 PM 5/24/21 6:21 PM