Publicidad
Idiomas disponibles
Idiomas disponibles
The neck loop is for use with hearing aids that
have a T (Telecoil) setting. Plug the neck loop
into the two small 2.5mm jack sockets that are
located either side of the earphone socket.
Place the neck loop over your head so that it rests
on the back of your neck and shoulders.
Switch your hearing aid to the T setting / program.
It may be necessary to adjust the volume setting
on the iBT10 and / or your hearing aid to achieve
optimum performance.
NOTE:
Not all hearing aids have a T setting, or it may not
be enabled. Consult your audiologist / hearing
care professional for further guidance.
The neck loop will release from the iBT10 should
it become entangled. Plug the neck loop back in
to resume operation.
Do not plug the earphone headset and neck loop
into the iBT10 at the same time.
10
Connecting
Publicidad
